Spray painting equipment that can supply a high air volume at low pressure (HVLP) characterised by excellent practicality, flexibility and simplicity of use by means of a 3-stage tangential motor 1400 watt.

 

 

 

 

 

 

The air flow rate is adjustable by means of a built-in electronic system – only for TMR80 and TMR140 models – in order to optimise the quantity and finishing degree of the covering product also on the basis of its density/viscosity.
It enables the user to paint at a high speed rate and with great accuracy, to increase coverage and safety, to lower the costs and protect the environment with limited overspray effect.
 
Moreover, the equipment can produce hot and dry air (by decreasing relative humidity by 40% on the average), all this to the advantage of a better and quicker material drying process.

 

       

 

TECHNICAL Specifications :

 

Motor Double insulation
Voltage 230 Vac, 50 Hz
Power 1400 watt
Group of fans Three-stage
Quantity of delivered air 560-2200 lt/min
Pressure 0,02-0,32 bar (0,3/4,65 psi)
Air tube 7 m
Electrical cable 7 m
Operating temperature From -10°C to +40°C
Size 300x220x310 mm
Weight 6 kilos
Air filter Two

 

       

 

Combinable with :

 

        

         MRI                    MRI-AS                  MRS                      MBA

 

 

Rucksack for TPC01N turbine code PMR140

The anatomical support for the shoulder transportation of TMR Turbines is a frame including a special spray gun called MAF1, directly connected to a 6lt-tank to increase endurance. The system is conceived to let the user’s hands free and to enable him to easily move.

 
The spray gun MAF1, supplied with TPC01N, enables the user to apply several coverings, such as water or solvent* based varnishes and wall paints, on different media (metal, wood, masonry…). Thanks to its characteristics it ensures the atomisation of the covering product, wrapping it up in an air jet and gently and accurately settling it on the surface to be painted. It is possible to spray in different shapes by turning the air cap (vertical oval, horizontal oval or round) with a very limited overspray effect.
The quantity of covering product can be adjusted according to its density/viscosity by means of an adjusting screw.

The spray gun MAF1, supplied with TPC01N, enables the user to apply several coverings, such as water or solvent* based varnishes and wall paints, on different media (metal, wood, masonry…). Thanks to its characteristics it ensures the atomisation of the covering product, wrapping it up in an air jet and gently and accurately settling it on the surface to be painted. It is possible to spray in different shapes by turning the air cap (vertical oval, horizontal oval or round) with a very limited overspray effect.The quantity of covering product can be adjusted according to its density/viscosity by means of an adjusting screw.