Spray printing equipment that can supply a high air volume at low pressure HVLP by means of a 3-stage tangential motor 1800 watt It is characterised by excellent practicality, versatility and user-friendliness.

The system can be combined with specific spray guns to paint at a high speed rate, safely and with great accuracy by decreasing costs and for the purpose of environmental protection with a low mist effect.
Moreover, the equipment can produce hot and dry air (by decreasing relative humidity by 40% on the average), everything to the advantage of a better and quicker drying process of the material.
The range top for performance. Its 1800W motor can apply all covering materials in a surprisingly quick manner. The new features also enable the operator to spray very thick and difficult materials.

The TMR180E turbine has a touch control panel with led indicators. This innovation makes it easier and quicker to regulate the motor power by simply touching the buttons. Complete with a patented Rigo RF system as a standard. A radio control specifically studied to manage the motor power regulation at a distance, just as the control panel touch to optimise the quantity and degree of finish of the covering product also on the basis of its density/viscosity.

The Air Tube Flex system is a standard novelty too: tube specifically studied and accomplished to make the spray gun considerably handier and more user-friendly under any circumstance of movement.

It can be used with all types of water- or solvent-based paints and, in this case, due to the power and quantity of supplied air, even of heavier materials, such as plastic coatings (in combination with the MBL spray gun).

A peculiarity of this machine is higher pressure for a work speed definitely higher than the one of other models of the same series.
The equipment can be combined with a high number of accessories for customisation and fulfilment of one’s own needs.

        

Technical  Specifications :

Type of motor Double insulation                 
Voltage 230 Vac, 50 Hz
Power 1800 watt
Group of fans Three-stage
Qnt of Air 1100/2500 lt/mn
Presure 0.10/0.44 bar (2,03 psi)
Air tube 7 m
Electrical cable 7 m
Operating temperature from -10°C to +40°C
Size 300x220x310 mm
Weight 6.7 kilos
Air filter Two

 

 

       

Combinable with :

        MRI                     MRI-AS              MRS                       MBA

If used in combination with the rucksack for TPC01N turbine code PMR180E

The anatomical support for the shoulder transportation of TMR Turbines is a frame including a special spray gun called MAF1, directly connected to a 6lt-tank to increase endurance. The system is conceived to let the user’s hands free and to enable him to easily move.
The spray gun MAF1, supplied with TPC01N, enables the user to apply several coverings, such as water or solvent* based varnishes and wall paints, on different media (metal, wood, masonry…). Thanks to its characteristics it ensures the atomisation of the covering product, wrapping it up in an air jet and gently and accurately settling it on the surface to be painted. It is possible to spray in different shapes by turning the air cap (vertical oval, horizontal oval or round) with a very limited overspray effect.The quantity of covering product can be adjusted according to its density/viscosity by means of an adjusting screw.

PMR150E