GIOTTO is a very powerful and easy to use airless electrical membrane pump designed for spraying all products used in buildings, metal constructions, insulation etc. 
Suitable for stucco or finished, polyurethane based insulating materials, applied, fire resistant, thixotropic, viscous materials with high viscosity, water colors, solvent, nitro, xylene, gasoline etc.

The GIOTTO can take up to 90 m of hose, spraying with .031 '' nozzle viscous materials with a constant pressure of up to 250 bar. It can also spray with two spray guns in parallel. It is designed to be easy to clean and maintain.

1 years factory warranty!!

Products : Acrilic, Plastics, Sealants, Varnishes, Primers, Water based, Thixotropic products, Latex, Industrial epoxy, not abrasive paints

             Giotto with suction hose                               Giotto with 50 lt tank

Giotto with 35lt tank

Giotto Gas engine



Polyurethane base Hyperdesmo LV - Alchimica


TAR spray

In the price includes :

Ergonomic base with 2 wheels for easy transport.
Back base for the hose
high pressure manometer

pressure regulator
10m hose 
1 airless gun with noozle and tip base
Suction hose with filter and return material hose

May take :

Up to 100 meters of hose
Spray adapter for spraying  with 2 guns (depending on the viscosity of the material)
Pump filter
Gun extensions from 30cm to 3m
Sectional extension

6-liter tank or suction hose
Connection with barrel or ton tank

With airless application you save more than 50% of your material, you finish half the time with half wages !!

Technical Specifications:

Motor: Single phase
Volt 230V / 50Hz
Power: 3ΗΡ - 2,2kW
Weight: 45 kg
Maximum Pressure: 230 Bar
Max tip size: .031''
Flow rate: 8 L/min

Operation of the airless membrane pump:

The airless electrical diaphragm pumps are uses to spray materials such as paint, coating, finishes, insulators, etc. with high pressure airless spraying. The pump works with an electric motor that transmits  its rotary action to an eccentric cam connected to a piston dipped in an oil chamber.The piston with the action depressor absorbs the oil that pushes the pressure to the diaphragm which is a highly resilient and durable material vibrating at the same frequency as the piston.
This action creates a depression: the product sucks and is pushed by the diaphragm itself, towards the tube, to the airless spray.A special valve regulates the pressure of the oil circuit and the pressure of the product itself.