ZEUS airless


ZEUS is a very powerful electric piston pump suitable for thick materials such as polyurethane-based insulators, stucco, epoxy, etc.

More details

This product is no longer in stock

8 060,00 € tax incl.

More info

ZEUS is a very powerful electric piston pump suitable for thick materials such as polyurethane-based insulators, stucco, epoxy, etc.
It has a digital control panel and a suction piston.

ZEUS is suitable for all materials with low to very high viscosity.

Materials: stucco or ready-mixed stucco, polyurethane based insulating materials, applied, fire retardant, thixotropic, viscous materials with high viscosity, colours of water, solvent, nitro, xylene, gasoline with minimum or no dilution

ZEUS can take up to 50m of hose, spraying with .029 '' noozle viscous materials with a constant pressure of up to 220 bar. It can also be sprayed with two spray guns along with spray nozzles 017 ''. It is designed to be easy to clean and maintain.

2 years factory warranty!

ZEUS includes:

Ergonomic base with 2 wheels for easy transport.
back base for hose
Digital control and pressure regulator
pump filter

15 meters anti-thrust hose

1 airless L91X gun with tip and noozle

Larius Toolkit with Pump Keys

May take:

Up to 50 meter hose
Spray adapter with 2 parallel guns (depending on material viscosity)
Gun extensions from 30cm to 3m
Sectional extension

100 liter container or suction hose
Connection  with barrel or ton tank
Σύνδεση με βαρέλι ή δεξαμενή τόνου

With airless application you save more than 50% of your material, you finish in half the time with half wages !!


motor type single phase
Electrical Voltage / Frequency 230V / 50Hz
power 1,5 ΗΡ - 2kW
weight 58 kg
Maximum Pressure: 220 Bar
max noozle .029''
Maximum Flow: 4 l /m

airless pump piston:

An electric piston pump is used for high pressure painting without air (from this process derives the term "airless - airless»). The pump is controlled by an electric motor in combination with a reducer. An eccentric shaft and a piston enabling to obtain the reciprocating movement necessary for operation of the "pumping group" piston. The movement of the piston generates a "gap" ..

The material is pushed towards the pump outlet and then sent to the gun through the flexible hose. An electronic device beside the reduction box, is used to regulate and control the pressure of the material leaving the pump .. When the pump reaches the set value, the motor stops and starts again when the price is reduced .. A safety valve overpressure guarantees the absolute reliability of the equipment.


  • Content
  • Write a review

    ES 4500 airless

    ES 4500 airless

    The ES 4500 is a small, very powerful and practical, airless membrane electrical pump suitable for spraying all products used in buildings, metal constructions, carpentry, etc. with adjustable pressure from 60 bar up to 200 bar

    Write a review

    Related Products