DRAGON airless

New

DRAGON is a very powerful electric piston pump suitable for thick materials such as polyurethane-based insulators, plaster, epoxies etc.

More details

This product is no longer in stock

0,00 € tax incl.

More info

DRAGON is a very powerful electric piston pump suitable for thick materials such as polyurethane-based insulators, plaster, epoxies etc.

It has a digital control panel and a suction piston.



Larius's powerful model for all materials with low to very high viscosity.

Suitable for plaster, polyurethane based insulating materials, overcoating, fire resistant, thixotropic, viscous materials with high viscosity, water colours, solvent, nitro, xylene, gasoline with minimal or no dilution etc

DRAGON can take up to 70m of hose, to spray with .033 '' noozle thicker materials with a constant pressure of up to 230 bar. It can also be spray with two spray guns parallel with 019 '' nozzle. It is designed to be easy to clean and maintain.

Βίντεο :

2 years factory warranty from LARIUS!!!


in the price includes :


Ergonomic base with 2 wheels for easy transport.
Back base for the hose
Digital monitor and Pressure regulator
Pump filter

15m airless hose 3/8-3/8

1 airless gun L91X with tip base and nozzle

Larius Toolkit with Pump Keys

May take :

up to 70m hose

Spray adapter with 2, 3, 4  parallel guns (depending on material viscosity)

Gun extensions from 30cm to 3m
Sectional extension
100 liter tank or suction hose

Connection with barrel or ton tank

With airless application you save more than 50% of your material, you finish half the time with half wages !

SPECIFICATIONS:

motor type single phase
Electrical Voltage / Frequency 230V / 50Hz
power 3,2 ΗΡ - 2,4kW
weight 66 kg
Maximum Pressure: 230 Bar
max noozle .033''
Maximum Flow: 5 Λίτρα /λεπτό

Operation of the airless piston pump:

An electric piston pump is used for non-air high-pressure dying (the term "airless" is derived from this process- airless=without air). The pump is controlled by an electric motor in conjunction with a gear unit.An eccentric shaft and a piston allow the reciprocating motion which is necessary for the operation of the "pumping group" with a piston to be obtained. Piston movement produces a "vacuum".

The material is pushed to the pump outlet and then it sent to the gun via the flexible tube.An electronic device located next to the reduction frame is used to adjust and control the pressure of the material which is leaving the pump. When the pump reaches the set value, the engine stops and starts again when the value drops.An overpressure safety valve guarantees the absolute reliability of the equipment.

Reviews

  • Content
  • Write a review

    ES 4500 airless

    ES 4500 airless

    The ES 4500 is a small, very powerful and practical, airless membrane electrical pump suitable for spraying all products used in buildings, metal constructions, carpentry, etc. with adjustable pressure from 60 bar up to 200 bar

    Write a review

    Related Products