The M200 raises the processing of thin-layer gypsum products to the next level – thus the creation of e.g. perfect plasterboard walls is child’s play. The M200 inspires by the lump-free dilution of gypsum products, especially for fillers. This brand new technology, enables a perfect finish of plasterboard in the shortest time. With a capacity of 0.5-2 m²...
The m-tec P20 is a compact pump for processing soft materials or pumpable products with a granularity of up to 4 mm. The P20 is mainly used to pump basic, decorative, synthetic resin and silicate renders, adhesive and reinforcing mortars, fillers or key coats.Pump P20 is fitted with a frequency converter (FU).
With its convincing technology, the M330 marks the start of a new generation of mixing pumps. The “trick”with this new technology is our latest patented mixing principle, which allows the material to be blended perfectly and also ensures permanent consistency of the material.
The foam generator FC300 fits both the M330 and the duomix. These mixing-pumps are perfect for producing cement slurries. When used in conjunction with FC300 foam cement generator a high quality foam cement is produced. Once this foam cement has hardened out a final layer of floor screed can be applied.
The M-TEC P25 is a powerful pump for processing soft materials or pumpable products with a granularity of up to 5 mm. The P25 is mainly used to pump basic, decorative, synthetic resin and silicate renders, adhesive and reinforcing mortars, fillers or key coats.
A modular design, the M280 presents impressive workmanship that is both lightweight and ideal for building site conditions. Specifically its ease of handling and m-tec reliability make the M280 the mixing pump for all applications. For instance, the M280 can process all inside and outside machine plasters with the utmost ease.
The m-tec P50 is a powerful mortar pump for conveying all pumpable product with a max grain size up to 8 mm. Therefore the P50 is the perfect machine for processing mortars, concretes, plasters as well as self leveling compounds and floor screeds. The P50 is available in different designs suitable for the different applications with an output up to 110...
The long-term success story of our most reliable and efficient mixing pump mono mix was decisive for the development of the mono mix II SC It is the powerful and efficient mixing pump for the application of thin-layer plasters on rough and uneven surfaces, the application of thin-layer gypsum products gypsum plasterboard or products for the air-tight...
The Μono Μix is available in two versions: 230 Volt or 400 Volt. In the 230 Volt version a frequency converter ensures that optimum performance can be achieved at any time: this is a huge advantage on building sites with a 230V power supply, e.g. during refurbishment projects or interior work.
Excellent mixing and tremendous adaptability for a wide variety of materials are the key properties offered by the duomix. The reasons for this: The unique m-tec dual mixing system together with the patented mixing principle – together making a combination that no other mixing pump on the market can offer!
Mixer D20 is a robust allrounder for processing dry mortar products with a granularity of up to 4 mm. It is the bestselling mixer in this class and, depending on the version, rationalizes the processing of decorative renders, bricklaying mortar or fine concrete.
The m-tec speedy-MP is an easy-to-handle pump with 30lt tank for processing soft materials or pumpable products such as structured or decorative renders with a granularity of up to 2 mm. It is mainly used to pump creative decorative materials, fillers, key coats or primers.